Diamond Drilling Services Cambridge

Welcome to Diamond Drilling Cambridge, company providing various drilling services.

Our Diamond Drilling Services

DIAMOND DRILLING SERVICES CAMBRIDGE

9

Diamond Core Drilling Cambridge

9

Diamond Wall & Floor Chasing Services Cambridge

9

Diamond Floor Sawing Services Cambridge

9

Floor Scabbling Services Cambridge

9

Cutting Openings Services Cambridge

9

Structural Openings Services Cambridge

Our Work

Diamond drilling services Cambridge

Diamond Drilling Services Cambridge

DIAMOND CORE DRILLING 

We provide Diamond drilling services in Cambridge.

We have Professionals who specialise in diamond core drilling. You’ve come to the correct place if you’re seeking a technique to make smooth, exact holes in materials like reinforced concrete, masonry or similar. Diamond core drilling is one of our specialties at Diamond Drilling Cambridge. That is to say, this method has the advantage of generating no dust, little debris and no vibration.

Because the cutting is so exact, it is able to achieve this, resulting in a higher standard finish, a lower danger of structural damage, and even a reduction in disposal costs and moreover, time. Because diamond core drilling machines are so light and portable, they can even be used in limited locations.

To conclude, our company offers diamond core drilling in Cambridge and the surrounding areas, therefore we can work on a wide range of projects. This may entail drilling holes in walls and floors for plumbing and electrical work, as well as the removal of concrete cores. When it comes to diamond core drilling sizes, we can use either electric or hydraulic drilling rigs to drill holes with diameters ranging from 12mm to 550mm.

Moreover, we have water control facilities to cool the drill bit as part of our concrete core drilling contractors’ services. This may be necessary to minimize debris even further while also extending the drill bit’s life. Dry core drilling, which is commonly used to drill through ordinary house materials such as soft stone, sandstone brick, and block, is also an option. Only rotary action is permitted, with no additional percussive action. Alternatively, horizontal drilling requires a tiny amount of pressure to grind away at the material being worked on, but vertical drilling relies only on the drill’s gravitational pull.

Diamond drilling services Cambridge

DIAMOND CHASING 

To conclude, we provide a variety of concrete cutting services in the Cambridgeshire area.

You’ve come to the correct place if you’re seeking for a technique to make smooth, exact holes in materials like reinforced concrete, masonry or similar. Diamond core drilling is one of our specialties at Diamond Drilling Cambridge. Most importantly, this method has the advantage of generating no dust, little debris and no vibration.

Because the cutting is so exact, it is able to achieve this, resulting in a higher standard finish, a lower danger of structural damage and moreover, even a reduction in disposal costs and time. Diamond core drilling machines are so light and portable, they can even be used in limited locations.

Our company works in Cambridge and the Cambridgeshire area we are providing for a variety of projects. For instance, we can prepare walls and floors ready for plumbing and electrical work, which may require the drilling of holes. We can also remove concrete cores. A variety of holes can be drilled, varying in size from 12mm to 550mm. 

Using water control systems to cool the drill bit is one of our techniques. This may be required to further reduce debris while also increasing the drill bit’s life. Drilling through popular building materials, which include: soft stone, sandstone brick, and block, is another method. There is no further percussive action allowed, only rotational action. For example, horizontal drilling requires a small amount of pressure to grind away at the material, in contrast to vertical drilling, which relies only on the drill’s gravitational force.

Diamond drilling services Cambridge

FLOOR SAWING 

Diamond Drilling Cambridge is pleased to welcome you. Using state-of-the-art diamond cutting technology, we specialise in drilling and cutting reinforced concrete and masonry. To summarise, we provide a number of different sawing services, some of which are listed here.

One of the most fundamental diamond sawing techniques is floor sawing, which is the best way of cutting when clean, straight slices are required. A machine equipped with a diamond cutting disc is used to create straight cuts to a predetermined depth when cutting a flat, horizontal surface. Therefore, when precision is required, our floor sawing services are suitable for cutting trenches in concrete, tarmac and asphalt. This is to say, this method is used on highways, concrete floors and any other building material.

Diamond Drilling Cambridge uses a low-emission, diesel-powered self-propelled mobile saw for floor sawing. It can cut reinforced concrete, tarmac and asphalt surfaces up to 400mm deep. The entire process is water-controlled, allowing the slurry to be collected, processed and treated before being disposed of.

We’re also known for our diamond wire sawing services. Wire sawing is a technique for cutting huge blocks of material or when access to our other cutting devices is restricted. We can assist you with any concrete drilling or sawing needs you may have; contact us today to learn more.

Diamond drilling services Cambridge

SCABBLING

There is a vast range of situations where removing the top layer of concrete is advantageous. If the concrete has just been poured, it may need to be leveled or textured before it can be painted or coated. As a result, a layer may be removed in other circumstances to obliterate deposits (such as road markings) or because it has become polluted (such as in a sewage plant).

Scabbling is the technique employed to generate this appearance. Mechanical scabbling entails the use of equipment that look like pneumatic drills but have a lot of little heads. A concrete floor scabbler is a machine that evenly chips away at the concrete throughout the entire block until the desired effect is achieved. Because most builders do not use concrete scabbling on a daily basis, few find it cost feasible to possess their own scabblers. Therefore, for their scabbling needs, most people would resort to concrete cutting and drilling companies, like us. Because our Builders in Cambridge are well supported by an industry that knows their demands and is able to provide first-rate service.

Diamond Drilling Cambridge is the place to go if you’re looking for scabbling services in Cambridge. We have a good reputation with our customers as a cutting, drilling, and scabbling company that has been around for a long time. Which is why customers keep coming back to us. We’ve been scabbling concrete in the southeast for a long time, so you can count on us to provide a quick and quality service every time.

Whether you’re doing groundwork, erection, or finishing, attaining a professional-looking outcome at each phase is beneficial for any business. It also contributes to your reputation as a responsible and dependable contractor. Choosing the correct scabbling services ensures that you get the best outcomes every time; contact us to learn more.

Diamond drilling services Cambridge

CUTTING OPENINGS

Above all, it’s critical to have the correct equipment on hand when cutting door or window openings. Such handheld portable instruments, such as a ring saw or chainsaw, are excellent for this technique. This is especially true when working on construction or demolition sites, where space may be at a premium.

Chain saws, with diamond-tipped teeth, are available from Diamond Drilling Cambridge. This allows you to cut through tough materials like reinforced concrete and conduct plunge cuts with ease. When cutting straight lines with right-angle corners, we recommend this style of saw.

When slicing through hard materials, this technique provides the highest level of precision, making it ideal for creating apertures where over-cutting must be avoided. In conclusion, diamond chainsaws can cut to a tremendous depth, making them ideal for chopping down old stone structures with thick walls.

Both types of saws are hydraulically propelled and require water to operate. The diameter of the diamond blade, which may reach a maximum depth of 250mm, determines how deep the cut can be. The ring saw is especially quiet, making it ideal for internal work or tight places. To conclude, both saws are completely dust-free, vibration-free, and fume-free. Therefore, these diamond saws are great for cutting apertures, whether you’re doing a refurbishment or a conversion.

Diamond drilling services Cambridge - Structural Openings

STRUCTURAL OPENINGS 

You’ve come to the correct place if you’re looking for a technique to make smooth, exact holes in materials like reinforced concrete, masonry or similar materials. Diamond core drilling is one of our specialties at Diamond Drilling Cambridge. Above all, this method has the advantage of generating no dust, little debris and no vibration.

Because the cutting is so exact, it is able to achieve this, resulting in a higher standard finish, a lower danger of structural damage, and even a reduction in disposal costs and time. Because diamond core drilling machines are so light and portable, they can even be used in limited locations.

Our company provides diamond core drilling services, located in Cambridge and the surrounding Cambridgeshire area, allowing us to work on a wide range of projects.

For example, in preparation for the removal of concrete floors, drilling holes in preparation for  walls and floors, which may be required for plumbing and electrical installation. Depending on the size of the hole required, we can use either electric or hydraulic drilling rigs to drill holes with diameters ranging from 12mm to 550mm.

As part of our concrete drilling services, we offer water control systems to cool the drill bit as part of our concrete core drilling contractors’ services. The drill bit’s life may be extended by using this method. Therefore, this may be necessary to minimise debris even more so. 

Drilling through common building materials such as soft stone, sandstone brick and block is another approach to dry core drilling. Only rotating action is permitted therefore, there is no need for percussive action. Vertical drilling grinds away at the material, whereas horizontal drilling uses only a small amount of pressure to grind away at the material.

Address

40 Nuttings Road, Cambridge, CB1 3HU

Phone

01223 782959

Email

contact@diamonddrillingcambridge.co.uk